Toolbox

Toolbox

Item No.: 56207
Add to wish list

The toolbox contains the basic equipment of tools and testing equipment for the metal trades.

Quality tools from Promat

  • 1 caliper gauge 150 mm DIN 862
  • 1 outside micrometer 0-25 mm
  • 1 protractor
  • 1 flat angle 150 × 100 mm
  • 1 stop angle 100 × 70 mm
  • 1 hair square 75 × 50 mm
  • 1 hair ruler 100 mm
  • 1 steel rule 300 mm
  • 1 set of feeler gauges 0.05 to 0.5 mm
  • 1 set each of radius gauges 1-7 and 7.5-15 (concave and convex)
  • 1 scriber
  • 1 centre punch
  • 1 each fitter's hammer 300 g, 800 g DIN 1041
  • 1 plastic hammer
  • 1 flat butt file each with handle 150-1, 150-3, 250-1, 250-3 DIN 7261
  • 1 triangular file each with handle 150-3, 200-1, DIN 7261
  • 1 round file each with handle 150-3, 200-1, DIN 7261
  • 1 square file each with handle 200-1, 200-3 DIN 7261
  • 1 half-round file each with handle 150-3, 250-1, DIN 7261
  • 1 needle file set H3 with screw head handle flat, triangular, round, square
  • 1 file brush
  • 1 triangular scraper (with hollow grinding)
  • 1 pin punch each 2 mm, 3 mm, 4 mm, 5 mm DIN 6450
  • 1 Allen key set each SW 1.5-2-2.5-3-4-5-6-7-8 mm
  • 1 screwdriver set 6 pcs.
  • 2 parallel screw clamps Clamping width: 60 mm
  • 1 double open-ended spanner set
  • 1 parting chisel 10 × 2
  • 1 flat chisel each 120 × 10, 180 × 20
  • 1 combination pliers
  • 1 centre drill A1, 6 A2.0 DIN 333 each
  • 1 each countersink 90° 5-10, 10-15
  • 1 pair of safety goggles
  • 1 bevel (setting angle) approx. 150 mm
  • 1 pair of compasses 150 mm leg length
  • 1 machine tap M4, M5, M6, M8, for blind hole threads
  • 1 machine tap each M4, M5, M6, M8, for through-hole threads
  • 1 set of taps M4, M5, M6, M8, tap wrench
  • 1 twist drill each 3.0 to 10.5 (0.5 mm increasing) intermediate size 3.3-4.2, 6.8-10.2
  • 1 flat countersink each 8 × 4.5 /10 × 5.5 /11 × 6.6 DIN 373
  • 1 Puk saw
  • 1 Hand hacksaw for metal 300 mm DIN 6473

Matching this