Training stand for teaching the basics of installing and maintaining drinking water systems.
Many practical exercises and tasks can be performed at the drinking water training stand, from analysis and planning to implementation and evaluation of customer orders.
Note: The installation room must have a floor drain to remove the water. Alternatively, a lifting unit can be connected to the tub and the water pumped into a sink, for example.
- Domestic water connection with shut-off valves, water meter and backflow preventer.
- Backwashable fine filter and pressure regulator
- External tap designed as a ring main whose function is made visible via a Venturi nozzle and turbine
- "Safe" pipe aerator
- Copper pipe installation with transparent plastic sections
- Two-handle tap and lever mixer
- Electric hot water tank
- Transparent membrane expansion vessel
- Circulation pipe with pump
- Various measuring points for pressure and temperature
- Safety valve
- Thermostatic valve for the circulation pipe
- Line regulating valve
- Component analysis of various fittings and components in a drinking water installation.
- Use of various safety devices according to DIN EN 1717 and visualisation of back-suction in the absence of a backflow preventer
- Maintenance work on the drinking water installation (e.g. function check of a backflow preventer, maintenance of a pressure reducer, carrying out a standard-compliant flushing of the filter, triggering the pipe aerator)
- Consequences of the lack of proper insulation of drinking water pipes
- Corrosion protection measures using the example of the electric drinking water heater
- Commissioning of a drinking water pipe
- Explanation of the simplified pipe network calculation according to DIN EN 806-3
- Functional sequences on an electric hot water tank
- Function and inspection of the safety group on the drinking water storage tank
- Installing the drinking water pipe from a hygienic point of view (e.g. dead side arm, air pockets)
- Vocational schools
- Company and inter-company training centres
- Mobile training stand on rollers
- Detailed didactic documents for the practical presentation of customer orders with:
- Basic information
- Tasks
- Solutions to the tasks
- Dimensions (W x D x H in mm): 1,500 x 900 x 1,940
- Weight: 190 kg
- Electrical connection: 400 V (Cekon plug)
- Water connection: GK coupling or ¾ inch