The 2-channel measuring technique unit is reduced to the most important basic functions - for particularly high mobility and comfortable handling. Measurement results can be called up via connection to a PC or tablet.
Galvanic isolation between AVL DITEST SCOPE and PC
The galvanic isolation protects the components of the AVL DITEST Scope from short circuits caused by voltage surges and ground loops. This prevents ground loops when measuring at mains connected measuring points (e.g. socket) and at the PC. Defective components on the vehicle or measuring device are thus excluded.
Differential measuring channels
The differential measurement channels allow measurements at 40 MS/s each and full bandwidth. Each channel can be used independently of the others - so current, resistance and voltage measurements can be performed in parallel. Short circuits and faulty measurements during the measurement process are thus excluded.
Exemplary hardware
Galvanic isolation of the channels and between measuring unit and PC
- Differential measuring channels
- Guided connection explanation of the sensors using Active Probe Supply with Color Guide
- Automatic zero adjustment and demagnetization (degaussing)
- Guaranteed long-term measurement accuracy of 5 years without calibration
- Automotive sensors
- Sturdy and ultralight magnesium housing with rubber protectors
Sophisticated software
- Intuitive and self-explanatory operability
- Over 400 pre-configured measurements
- Automatic sensor recognition
- Guided measurement steps, connection explanations and detailed descriptions
- Automatic measuring range configuration
- Direct reference curve comparison
- Curve recorder function
Product advantages
- Galvanically isolated inputs
- 2 differential oscilloscope measuring channels with 40 MS/s each
- Active Probe Supply with Color Guide
- Voltage measurement up to 500 VDC/250 VAC
- Current measurement 1 mA to 1800 A AC/DC
- Resistance measurement from 0.1 Ω to 10 MΩ
- Resolution: Scope 14 bit, Digital Multimeter 16 bit
- Channel independent bandwidth and sampling rate
- AVL DiTEST Scope 1200 Module
- Power supply unit with power cord
- Cable USB
- 2 x cable URD
- 2 x test probes red&black
- 2 x crocodile clips red&black
- Current clamp 600A
- CD manual
- Device case
- Packaging