Swivel Arm
Fully Assembled

Item No.: 69557

The swivel arm can pick up workpieces from one location and place them in another (Pick-and-Place). Due to the design engineering of the assembly, the two locations for pickup and placement must be in a straight line and opposed to each other at an angle of 180°, but their height can be different. The central component of the Swivel Arm is its gripper arm, at the end of which there is a vacuum suction device. It is driven by a pneumatic rotary cylinder activated by means of an electropneumatic valve. The vacuum suction device is also activated by an electropneumatic valve.

The swivelling angle can be adjusted using two internal or external end stops. Both end positions can be queried via the cylinder switch.

The operating pressure is 4 bar. The operating voltage is 24 VDC.

  • Work plan, technical communication
  • Testing, marking and identification
  • Manual and mechanical machining, separating and reshaping
  • Assembly work, joining
  • Design of electrical control systems
  • Commissioning of mechanical, electrical and pneumatic systems
  • Troubleshooting
  • Automation of work processes
  • Design and function of electro-pneumatic systems
  • Vacuum generation
  • Pick-and-Place tasks / handling of material

Functional module as finished device.

Delivery incl. digital media library with

  • Technical documentation
  • Assembly instructions
  • Multimedia content

Dimensions: 255 x 190 x 190 mm (L x W x H)
Operating pressure: 4 bar
Operating voltage: 24 VDC
Components:

  • 3 x cylinder switch
  • 1 x pressure switch
  • 1 x 5/2 way valve
  • 1 x 5/3 way valve
  • 1 x rotary actuator

Requirements for the PLC:

  • 4 digital PLC inputs
  • 3 digital PLC outputs

Variants


Accessories