- Heavy duty
- High productivity
- High reliability
- Recirculating ball rail for high rapid traverse speeds in all axes
- In all three axes high-torque servo drives
- Highly ribbed, torsion-free machine base
- Massive, exact milling table with four T-slots, large dimensions and precision ground
- Chip conveyor in screw conveyor designli>
- Machine light in working area
- RJ45 plug connection, USB and power connection 230 V
- Coolant system with 210 liters coolant tank and chip flushing system
- Closed control cabinet with integrated control panel heat exchanger; ensures optimum temperature and prevents the ingress of dirt particles.
- Portable electronic handwheel
- Telescopic guideway cover on all three axles
- Including two years SIEMENS warranty
Note: This is a selection of our numerous products for your training lab. Your regional Area Sales Manager will be happy to advise you on further variants and designs according to your individual needs!
Our products are designed for the European market and meet CE requirements. For international use, regional regulations apply which must be observed. The usability of the products shown must therefore be checked in advance.
| Dimensions and weights | |
|---|---|
| Length (product) approx. | 3000 mm |
| Height (product) approx. | 2310 mm |
| Width/depth (product) approx. | 1950 mm |
| Net weight approx. | 4350 kg |
| Drilling/milling output | |
| Max. size milling head | 63 mm |
| Max. size shaft milling cutter | 32 mm |
| Fast motion speed | |
| Fast motion speed X axis | 36000 mm/min |
| Fast motion speed Y axis | 36000 mm/min |
| Fast motion speed Z axis | 36000 mm/min |
| Electric data | |
| Supply voltage | 400 V |
| Milling table horizontal | |
| Horizontal milling table length | 900 mm |
| Horizontal milling table width | 410 mm |
| Horizontal milling table reach | 480 mm |
| Min. clearance vertical spindle - horizontal milling table | 102 mm |
| Max. clearance vertical spindle - horizontal milling table | 562 mm |
| Horizontal milling table T-groove size | 16 mm |
| Horizontal milling table T-groove number | 4 |
| Horizontal milling table T-groove spacing | 102 mm |
| Horizontal milling table max. load bearing capacity | 350 kg |
| Precision | |
| Repetition accuracy | ± 0.005 mm |
| Position accuracy | ± 0.005 mm |
| Cooling lubricant system | |
| Number of coolant pumps | 3 |
| Coolant pump(s) drive power | eacht 1.27 kW |
| Cooling lubricant system tank capacity | 210 l |
| Cooling lubricant system flow rate | 66 – 100 l/min |
| Pneumatic connection | |
| Pneumatic connection operating pressure | 5-7 bar |
| Travel | |
| Travel X axis automatic | 760 mm |
| Travel Y axis automatic | 440 mm |
| Travel Z axis automatic | 460 mm |
| Vertical spindle | |
| Vertical spindle chuck | SK 40 DIN 69871 |
| Vertical spindle speed range | 10 – 10000 min¯¹ |
| Explanation vertical spindle speed range | Please note that the maximum spindle speed in continuous operation must be reduced by approx. 20 |
| Vertical spindle drive motor output continuous operation S1 | 9 kW |
| Verticle spindle drive motor output S6-30 % operation | 21.2 kW |
| Vertical spindle torque drive motor continuous operation S1 | 57 Nm |
| Verticle spindle torque drive motor S6-30 % operation | 135 Nm |
| Feed motor torque | |
| Feed motor torque X axis continuous operation S1 | 6 Nm |
| Feed motor torque Y axis continuous operation S1 | 6 Nm |
| Feed motor torque Z axis continuous operation S1 | 11 Nm |
| **Drive speed fast motion | |
| Drive speed fast motion X axis | 50 – 780 min¯¹ |
| Drive speed fast motion Y axis | 50 – 780 min¯¹ |
| Drive speed fast motion Z axis | 50 – 780 min¯¹ |
| Turret | |
| Tool changer design | Double arm gripper |
| Number of tool slots | 24 |
| Max. tool diameter | 80 mm |
| Max. tool weight | 8 kg |
| Tool change time tool to tool (T to T) | 2 s |
| Electrical connections | |
| Total rated value | 31 kVA |
| Control | |
| Control type | SINUMERIK 828D |
| System software | SW 28x |
| CNC memory | 8 MB |
| Set change time | 1 ms |
| Look ahead | 150 |
| Number of tools | 512 |
- Double-arm gripper with 24 tool slots
- Siemens Sinumerik 828D control unit with 15.6-inch touch display