OPTIturn TZ 4 DPA 32-3
Center and Turning Center Lathe

Item No.: 104537

Add to wish list

Precision head and spindle lathes with digital position indicator DPA 32-3 and quick-change steel holder

Hardened and ground Z-axis guideway
Partial covering with entrained, large-dimensioned chip protection
Chip protection with integrated position indicator, coolant hose and additional control panel
Plan and upper slide spindle is hardened and ground and adjustable via split spindle nut
Guide and feed shaft cover
Fine graded feed and thread cutting area
LED machine lamp for complete illumination of the working area
Energy chain for gentle line and hose routing
Change wheels optionally also available for inch and module threads
Control cabinet with 24 V DC power supply
Switch with life cycle calculation tested according to EN ISO 13849
Decoupled handwheels tested to EN 23125
Two-channel right-left switch tested to EN 23125
All contactors and relays from Siemens or Schneider
Safety handwheels with release function in the X and Z axis
Forward removable chip tray
Quick change steel holder SWH 5-B
Steel holder 25 x 120 type D for square chisel 20 mm
Digital position indicator DPA 32-3

only for TZ 4:

Reduction of the deceleration time of the main spindle by electrically braked motor
Motor protection switch

Specifications
Dimensions and weights
Length (product) approx.	1960mm	Width/depth (product) approx.	1060mm
Height (product) approx.	1690mm	Net weight approx.	1250kg
Work areas
Max. height	200mm	Max. width	800mm
Swing diameter above machine bed	400mm	Swing diameter above planing slide	245mm
Bed width	260mm
Speed range
Number of gears	16	Speed range	45 – 1800min¯¹
Electrical Data
Drive motor output	3 / 4,5kW	Supply voltage	400V
Mains frequency	50Hz
Cooling lubricant system
Cooling lubricant system coolant pump output	0.125kW
Spindle
Spindle chuck	DIN ISO 702-1 No. 5 Form A2	Spindle bore/rod passage diameter	52mm
Chuck passage diameter	52mm	Spindle cone	MT 6
Tailstock
Tailstock chuck	MK 3	Tailstock quill stroke	110mm
Tailstock quill diameter	50mm
Pitches
Metric pitch	0,2 – 14mm/rev	Number of metric pitches	26
Imperial pitch	80 – 1Gg/1"	Number of imperial pitches	42
Diametrical pitch	3 – 200Gg/π	Number of diametrical pitches	33
Modular thread pitch	0,1 – 7mm/rev	Number of modular thread pitches	44
Travel
Travel upper slide	112mm	Travel cross slide	212mm
Travel carriage saddle	800mm
Feed
Longitudinal feed range	0,0263 – 1,8416mm/rev	Number of longitudinal feeds	48
Flat feed range	0,0133 – 0,9321mm/rev	Number of flat feeds	48
Electrical connections
Total rated value	6kW