- Smooth and powerful industrial electric motor
- Separate emergency stop impact switch
- Stable casting column
- Depth stop
- Precisely machined drill table with diagonal T-slots and circumferential cooling water channel
- Drilling table 360 ° rotatable
- V-belt cover with safety switch
- V-belt quick-clamping device
- Long, ergonomic cast aluminum sleeve lever cast in one piece (B 16H / B 24H with softgrip handles)
- Massive, large base plate with grooves, strongly ribbed on the back
- By swinging away the drilling table, base plate can be used as a work surface for particularly high workpieces
- Guaranteed concentricity measured better than 0.015 mm in the drill quill
- Drill spindle with precision ball bearings
- High-quality OPTIMUM keyless chuck in the standard scope of delivery
- Large, height-adjustable protective screen with safety switch
Note: This is a selection of our numerous products for your training lab. Your regional Area Sales Manager will be happy to advise you on further variants and designs according to your individual needs!
Our products are designed for the European market and meet CE requirements. For international use, regional regulations apply which must be observed. The usability of the products shown must therefore be checked in advance.
| Dimensions and weights | |
|---|---|
| Column diameter | 92 mm |
| Length (product) approx. | 698 mm |
| Height (product) approx. | 1721 mm |
| Width/depth (product) approx. | 449 mm |
| Net weight approx. | 142 kg |
| Drilling performance | |
| Drilling performance steel (S235JR) | 28 mm |
| Continuous drilling performance steel (S235JR) | 24 mm |
| Drilling table | |
| Drilling table workspace length | 340 mm |
| Drilling table workspace width | 360 mm |
| Drilling table T-groove size | 14 mm |
| Drilling table rotation | 360 ° |
| Max. distance spindle - drilling table | 860 mm |
| Speed range | |
| Speed range | 120 – 4000min¯¹ |
| Speed control | manually |
| Number of gears | 16 |
| Electric data | |
| Mains frequency | 50 Hz |
| Supply voltage | 400 V |
| Machine base | |
| Max. distance spindle - machine base | 1285 mm |
| Machine base workspace length | 320 mm |
| Machine base workspace width | 320 mm |
| Machine base T-groove size | 14 mm |
| Machine base T-groove number | 2 |
| Machine base T-groove spacing | 120 mm |
| Spindle | |
| Quill stroke | 105 mm |
| Spindle chuck | MT 3 |
| Reach | 200 mm |
- Keyless chuck (1 - 16 mm)
- Morse cone MK3 / B16
- T-nuts
- Machine vice BMS 120