- Heavy, solid cast construction
- Dirt and water resistant, easy to clean membrane keypad
- Electronics 24 V DC
- Depth stop
- Automatic gear lubrication via oil pump
- Threading attachment
- Machine light integrated in the drill head
- Main switch
- Large, height-adjustable protective screen with safety switch for the utmost protection of the user
- Large dimensioned, solid drill table, precisely worked with parallel T-slots and circumferential cooling water channel, strongly ribbed on the back, tiltable ± 90 ° sideways
- Coolant system and external coolant tank can be removed for easy and complete emptying
- Extremely stable, thick-walled cast-iron column for high power consumption
- Solid base plate with parallel T-slots, precision surface finish
- Mechanical quill feed
Note: This is a selection of our numerous products for your training lab. Your regional Area Sales Manager will be happy to advise you on further variants and designs according to your individual needs!
Our products are designed for the European market and meet CE requirements. For international use, regional regulations apply which must be observed. The usability of the products shown must therefore be checked in advance.
| Dimensions and weights | |
|---|---|
| Column diameter | 150 mm |
| Length (product) approx. | 880 mm |
| Height (product) approx. | 2445 mm |
| Width/depth (product) approx. | 880 mm |
| Net weight approx. | 560 kg |
| Drilling performance | |
| Drilling performance steel (S235JR) | 40 mm |
| Continuous drilling performance steel (S235JR) | 35 mm |
| Thread tapping steel (S235JR) | M 35 |
| Drilling table | |
| Drilling table workspace length | 530 mm |
| Drilling table workspace width | 530 mm |
| Drilling table T-groove size | 16 mm |
| Drilling table T-groove number | 3 |
| Drilling table T-groove spacing | 125 mm |
| Drilling table load bearing capacity | 250 kg |
| Max. distance spindle - drilling table | 725 mm |
| Min. distance spindle - drilling table | 130 mm |
| Speed range | |
| Speed range | 90 – 1520min¯¹ |
| Number of gears | 8 |
| Electric data | |
| Mains frequency | 50 Hz |
| Supply voltage | 400 V |
| Machine base | |
| Max. distance spindle - machine base | 1210 mm |
| Machine base workspace length | 435 mm |
| Machine base workspace width | 480 mm |
| Machine base T-groove size | 18 mm |
| Machine base T-groove number | 2 |
| Machine base T-groove spacing | 150 mm |
| Spindle | |
| Quill stroke | 170 mm |
| Spindle chuck | MT 4 |
| Reach | 350 mm |
| Quill feed speed | 0,1 – 0,2mm/rev |
| Quill feed gears | 3stages |
| Motor(s) | |
| Spindle motor drive output | 2.2 kW |
| Coolant pump drive motor output | 40 W |
- Keyless chuck 1 - 16 mm
- Morse cone MK 4-B16
- Operating tool