- Industrial engine
- Easy to use safety switch according to IP 54
- Digital drilling depth and speed indicator integrated in the housing
- Separate emergency stop impact switch
- Precision Spindle bore
- Safety electronics in 24 V DC
- Guaranteed concentricity measured less than 0.02 mm in the drill quill
- Drill spindle with precision ball bearings
- High quality keyless chuck
- Depth stop
- Precision machined, stable drill table with diagonal T-slots and circumferential cooling water channel
- V-belt cover with safety switch
- One piece cast aluminum die-cast quill lever with softgrip handles
- Large, height-adjustable protective screen with safety switch
- Heavy version of the entire machine
- GATES quality strap
Note: This is a selection of our numerous products for your training lab. Your regional Area Sales Manager will be happy to advise you on further variants and designs according to your individual needs!
Our products are designed for the European market and meet CE requirements. For international use, regional regulations apply which must be observed. The usability of the products shown must therefore be checked in advance.
Dimensions and weights | |
---|---|
Column diameter | 73 mm |
Length (product) approx. | 615 mm |
Height (product) approx. | 1015 mm |
Width/depth (product) approx. | 330 mm |
Net weight approx. | 63.5 kg |
Drilling performance | |
Drilling performance steel (S235JR) | 25 mm |
Continuous drilling performance steel (S235JR) | 20 mm |
Drilling table | |
Drilling table workspace length | 280 mm |
Drilling table workspace width | 245 mm |
Drilling table T-groove size | 12 mm |
Drilling table rotation | 360 ° |
Drilling table angle | 45 ° |
Max. distance spindle - drilling table | 425 mm |
Speed range | |
Speed range | 200 – 2440min¯¹ |
Number of gears | 12 |
Electric data | |
Drive motor output | 0.75 kW |
Mains frequency | 50 Hz |
Supply voltage | 400 V |
Machine base | |
Max. distance spindle - machine base | 618 mm |
Machine base workspace length | 240 mm |
Machine base workspace width | 250 mm |
Machine base T-groove size | 16 mm |
Machine base T-groove number | 2 |
Machine base T-groove spacing | 170 mm |
Spindle | |
Quill stroke | 80 mm |
Spindle chuck | MK2 |
Reach | 180 mm |
- Keyless chuck 1 - 16 mm
- Morse cone MK 2 / B16
- T-nuts
- Machine vice BMP 100