Energy supply unit Vario with equipment
With the Energy supply unit, you can ensure sufficient safety at any location when working under voltage and compressed air.
No matter whether it is a test, exercise or examination set-up: Equipped with a safety and switching unit, the Energy supply unit is an absolute must in vocational training. All set-ups can be plugged in via the easily accessible sockets and safety laboratory sockets in the front of the unit. Therefore, the 3-phase Energy supply unit is the ideal addition to your training lab.
The equipment includes, among other things, an emergency stop button, an all-current sensitive RCD type B, a key switch and a motor protection switch. Furthermore, a phase control lamp indicates whether the connected structure is live. Thus, the fuse protection fully meets the requirements of a workshop and laboratory operation.
The housing of the Energy supply unit Vario is made of powder-coated sheet steel. Easy access to the inside of the Power supply unit is provided from the front.
It is ideally suited for mounting on a workbench or table top. The unit is completely wired ready for connection and comes with a 3 m mains cable aand a CEE plug 400 V / 16 A.
The Energy Supply Unit is also available in the following sizes:
- 1.200 x 160 x 133 mm
- 2.000 x 160 x 133 mm
Note: This is a selection of our numerous products for your training lab. Your regional Area Sales Manager will be happy to advise you on further variants and designs according to your individual needs!
Our products are designed for the European market and meet CE requirements. For international use, regional regulations apply which must be observed. The usability of the products shown must therefore be checked in advance.
At the rear, two connection terminals are installed that are aligned parallel to the energy channel. This prevents the connectors from protruding to the rear.
- Safety module
- RCD 30 mA / 25 A, 4-pole type B, all-current sensitive
- Motor protection switch 10-16 A, 3-pole with undervoltage trigger
- Emergency stop button
- Mains indicator lamp, 3-phase
- Key switch
- Socket module
- 4 earthed sockets
- 2 safety lab sockets (4 mm) each for L1, N and PE
- Illuminated ON/OFF rocker switch
- CEE socket outlet
- 16 A, 5-pole
- Safety laboratory sockets (4 mm) for L1-L3 as well as N and PE
- Fixed DC voltage
- 24 V / 6 A DC, earth-free, stabilised
- Primary switched constant with 2 safety lab sockets (4 mm) & illuminated ON/OFF rocker switch
- Compressed air regulator
- 0.5-8.5 bar
- with pressure gauge and two 1/8" compressed air quick couplings
- Mains connection
- 5-pole, CEE plug 16 A
- 3 m mains cable
- WINSTA socket
- Empty plates