Energy Supply Unit Professional
1-phase, 230 V / 50 Hz

1.500 x 160 x 133 mm
Item No.: 43560

Energy supply unit Professional with equipment

With the Energy supply unit, you can ensure sufficient safety at any location when working under voltage and compressed air.

No matter whether it is a test, exercise or examination set-up: Equipped with a safety and switching unit, the Energy supply unit is an absolute must in vocational training. All set-ups can be plugged in via the easily accessible sockets and safety laboratory sockets in the front of the unit. Therefore, the 1-phase Energy supply unit is the ideal addition to your training lab.

The equipment includes, among other things, an emergency stop button, an all-current sensitive RCD type B, a key switch and a motor protection switch. Furthermore, a phase control lamp indicates whether the connected structure is live. Thus, the fuse protection fully meets the requirements of a workshop and laboratory operation.

The housing of the Energy supply unit Professional is made of anodised aluminium and is suitable for 19" submodules. The removable sheet steel rear panel allows easy access to the inside of the Energy supply unit.

It is ideally suited for mounting on a workbench or table top. The unit is completely wired ready for connection and comes with a 3 m mains cable as well as a Schuko plug.

The Energy Supply Unit is also available in the following sizes:

  • 1.200 x 160 x 133 mm
  • 2.000 x 160 x 133 mm

Note: This is a selection of our numerous products for your training lab. Your regional Area Sales Manager will be happy to advise you on further variants and designs according to your individual needs!

Our products are designed for the European market and meet CE requirements. For international use, regional regulations apply which must be observed. The usability of the products shown must therefore be checked in advance.

  • Safety module
  • Ground fault circuit interrupter 30 mA / 25 A, 2-pole type B, all-current sensitive
  • Motor protection switch 10-16 A, 3-pole with undervoltage trigger
  • Emergency stop button
  • Key switch
  • Mains indicator light
  • Socket outlet module
  • 4 Schuko sockets
  • 2 safety laboratory sockets (4 mm) each for L1, N and PE
  • illuminated ON/OFF rocker switch
  • Fixed DC voltage
  • 24 V / 6 A DC, earth-free, stabilised
  • primary switched constant, with 2 safety laboratory sockets (4 mm) and illuminated ON/OFF rocker switch
  • Compressed air regulator
  • 0,5-8,5 bar
  • with manometer and two compressed air quick couplings 1/8"
  • Mains connection
  • 3-pole, safety plug 16 A
  • 3 m mains cable
  • WINSTA socket
  • Empty panels

Variants