Laboratory tables and workstation systems are part of every training lab for practical vocational and further training. Our laboratory tables exactly meet the requirements of technical training: high-quality workmanship, excellent functionality and sophisticated ergonomics characterize the modern workstation systems. Practical in daily use and versatile in their equipment.
Laboratory Table Extend Rail - Well Supplied with Extended Functions
The Laboratory Table Extend Rail has a generously equipped 19" supply bridge and a spacious drawer. The experimental frame can be easily positioned in the guide rail. This facilitates the handling of the training boards.
Highlights - Aluminium Bridge Basic
- Installation options for powerful 19" devices
- Can be equipped with all 19" devices
- Mounting on the table top
- 1,800 x 320 x 133 mm (L x W x H) / 3HE, 350 TE
Highlights - Guide Rail
- Using stable 3 mm steel plates screwed to the foot profile
- Double carriage on each side of the table, thus torsion-resistant, no tilting when operated with one hand
- Additional stiffening of the experimental frame at the lowest profile by a 4-fold bent 3 mm sheet steel profile over the entire width.
- The stiffening profile also serves as a handle for moving the experimental frame
- Steplessly lockable by hand (by means of locking screws on the left and right side of the table)
Note:
The guide rail can be retrofitted to any table with a foot profile up to the edge of the table.
Laboratory Table Extend Rail
- Table top with postforming edge
- 2-row experimental frame
- 800 mm guide rail for experimental frame
Aluminium bridge incl. the following built-in devices:
-
Safety module - Ground fault circuit interrupter 30mA / 25A, 4pin type B, sensitive to universal current - Motor protection switch 10 - 16A, 3pol. with undervoltage release - Key switch - 3 power indicator lights
-
Emergency stop button
-
Adjustable DC voltage
- 2x 0 - 30V / 2 x 0 - 2A DC
-
Fixed DC voltage
- 24V DC / 6A
-
Function Generator
- Sine / square 1 µHz - 25 MHz
- Triangle 1 µHz - 1 MHz
- Resolution 1µHz
- Rise time rectangle 25 ns Built-in standard 120 MS/s, 10 bit bandwidth
- 4k points for arbitrary waveform
- 1% - 99% Duty Cyle for rectangle waveform
- 8.89 cm color LCD display
- Modulation types: AM, FM, PM, FSK, SUM
- Sweep and burst function
- Frequency Counter USB-Jost / Divice interface for remote control and waveform editing
- Frequency counter for external signals 5 Hz - 150 MHz
- 2 test leads
-
CEE socket module 16 A
- 5-pin CEE connector red
- 5 safety laboratory sockets
-
Socket outlet module
- 4 x grounding contact socket
-
Media connection module
- 2 x RJ45 socket
- 2 x USB
- 1 x HDMI
-
Compressed air module
- 2 x quick couplings 1/8
-
Main power supply, 5-pin
-
Drawer block, hanging version
- Dimensions (L x W x H): 418 x 540 x 583 mm
- Robust steel housing
- Drawers 4/5 extendable
- 2 drawers 1 HE
- 2 drawers 2 HE
- 1 drawer 3 HE
- Load capacity / drawer: 30 kg
- Central locking with pull-out protection
- Dimensions (L x W x H): 1.900 x 800 x 1.615 mm
- Weight: approx. 200 kg
- Power supply: 400 V / 50 Hz
Table top
-
Standard hard laminate (EN438)
- very hard, abrasion-resistant, HPL laminate
-
Panel thicknesses and edge shapes
- thickness, with postforming edge: 40 mm
Further features:
-
Surface slightly structured and glare-free
-
Temporarily heat resistant up to 180°C
-
Resistant to organic solvents, weak acids and alkalis, petrol and oil
-
Color: Light gray (RAL 7035)
-
Load capacity: work surface can be loaded up to 200 kg
-
Frame construction (substructure of the table top)
- 3 mm tubular steel frame, high-precision laser-processed
-
Foot Profiles
Standard conductive powder-coated in light grey (RAL 7035)
-
Snap-in and insert profiles
In standard color (RAL 5017)
-
Built-in appliances
Decor in standard color (RAL 5017)
- All electrical professions