Immerse yourself in the fascinating world of robotics and automation technology!
Teach the basics of the metal and electrical industry, combined with new automation technology, as part of an exciting and innovative project. The kinematics of the 7-axis robot arm are similar to those of an industrial robot. By building this robot arm, your students will learn all the necessary basics of metalworking and electrical engineering.
The basic configuration includes an Arduino. This means that the robot arm can be controlled and operated without a PLC, so that the model can also be used by the trainee at home. A connection to a PLC or various controllers is possible at any time!
Our goal is to prepare students for the mechatronics exam in the best possible way. The robot arm's linear axis corresponds to the axis model that appears in the second part of the (german) final exam. This allows students to apply their knowledge in a targeted way and align their skills with the exam requirements. The complete package includes all the materials needed to build the robot arm. The material set includes:
- standard parts,
- semi-finished products,
- circuit boards,
- and electric drives that are needed to build the robot arm.
The digital media library offers extensive training documents such as:
- sets of drawings,
- assembly drawings,
- pictures,
- videos,
- as well as the Arduino program.
It also contains control and evaluation sheets to check the progress and understanding of the trainees.
When you purchase the project work, you will receive a link where you can download the media library. Discover an innovative and practical way to learn the basics of the metal and electrical industry and prepare for the mechatronics engineer exam with our “robot arm” project work. Order the complete package today and start your exciting project!
Mechanical processing: All the necessary metal basics combined in one project
- Manual processing (not too extensive)
- Machining (not too extensive, everything can be done conventionally)
- Forming work / control cabinet construction
- Welding if necessary (not absolutely necessary)
All the necessary mechanical machine elements:
- Rolling bearing technology
- Plain bearing technology
- Guides
- Toothed belt
- Spindle drive
- Pinning
- Assembly
Electronic processing: Electrical basics
- soldering circuit boards
- creating a cable harness
- sensors (inductive, light barrier)
- actuators
- if necessary, control technology Arduino programming (not absolutely necessary, the program is finished)
- only protective low voltage
- read the circuit diagram
- troubleshooting
- Mechatronics engineers
- Electronic engineers
- Industrial mechanics
All materials needed to build the robot arm are included, with the following exception:
Standard consumables such as 0.35 mm² core wires, wire end ferrules and shrink tubing are not included.
- The cables for the servo motors and the magnets must be extended. The required core wires are not included.
- For connecting the motors and potentiometers, additional core wires, wire end ferrules and shrink tubing are required, which are also not included.