This pneumatic kit is suitable for pneumatic exercises in training rooms or workshops. The devices included offer a variety of possibilities, also for setting up your own pneumatic circuits. The content of the kit corresponds to the course of the German Federal Institute for Vocational Education and Training (BIBB).
All components are designed as original industrial components so that the trainees recognise the components in their later working environment. The individual components are mounted as complete assemblies on a quick-fix system for grooved plates (grid dimension 25mm) - snap-in. This enables safe and quick assembly of the training circuits. All plug-in connections are designed for 4 mm compressed air hoses.
The equipment set is delivered in a solid aluminium case.
- Storage in aluminium case
- Compact size
- Clearly arranged accommodation for quick access
- Best possible protection of the content
- Secure storage in the foam padding also allows a quick completeness check
- Foam inserts can be removed and placed in matching drawer cabinets to the workstation systems / laboratory benches.
For the area of pneumatics and electropneumatics, BIBB proposes a "Basic Pneumatics Kit" and an "Extension Kit Electropneumatics". Our equipment sets BIBB Pneumatics and the extension equipment set BIBB Electropneumatics (order no. 103106) were developed on this basis. The equipment sets are suitable for demanding initial and further training.
- Physical principles of pneumatics
- Compressed air generation and distribution
- Compressed air preparation
- Cylinders and directional control valves
- Supply air and exhaust air throttling
- AND/OR elements
- Sequence control with individual valves
- Sequence control with step chains (cycle chains)
- Measurement of voltage and current
- Solenoid valves
- Basic circuit with contacts
- Relays, latching
- Timing relays
- Pneumatic-electric transducers
- Beginners
- Pupils
- Trainees
- Technician
for further training in the professions for which training is provided:
- Industrial mechanic specialising in equipment and precision engineering
- Machine and system technology and production technology
- Construction mechanic specialising in equipment technology
- Mechatronics technician
- 1x maintenance unit with pressure gauge and manual shut-off valve, swivelling
- 1x Manifold block with 6x shut-off valves
- 1x Single-acting round cylinder D=25 mm, H=50 mm, with rail motor for signal transmitter
- 2x double-acting round cylinder D=25 mm, H=100 mm, with rail mounting for signal transmitter
- 1x pressure gauge (manometer)
- 2x 3/2-way valve, normally closed, with push button
- 2x 3/2-way valve, normally open, with push button
- 1x 5/2 directional control valve, pneumatically operated on one side
- 3x 3/2 way roller lever valve, normally closed
- 1x 3/2 way valve, pneumatically operated on one side
- 3x 5/2 directional control valve, pneumatically actuated on both sides
- 1x 5/3 directional valve, mid-position locked, actuated by compressed air on both sides
- 1x sequence valve
- 1x delay valve
- 1x shuttle valve
- 3x two-pressure valve
- 1x Throttle check valve
- 1x Quick exhaust valve
- 2x pneumatic proximity switch (3/2 way valve solenoid actuated)
- 1x suction cup
- 1x vacuum nozzle
- 2x Unlockable non-return valve
- 3x switching cam
- 25 m hose 4 mm
- 10 m hose 6 mm
- Various screw connections, T-pieces, silencers, gaskets.
- Storage box for small parts