MAPS Professional (single-sided)
Multifunctional Workstation System

Stationary - 230 V / 50 Hz

Item No.: 43410

Add to wish list

Multifunctional workstation system MAPS with workstation for one-sided use - Completely assembled

The multifunctional MAPS workplace system from Christiani allows you to teach almost all control technology technologies in industrial-technical vocational training in a practical way.

The basic configuration of the MAPS Professional consists of a single-sided work table, an energy terminal with safety modules and insert plates, an experimental frame, a grooved plate, cable comb, notebook holder and a rolling container. This means that different components and parts can be used at the training station. The extensive accessories allow you to expand the MAPS exactly according to your needs.

The workstation system can be combined with pneumatic/electropneumatic components and is also suitable for teaching PLC technology, sensor technology, electrical engineering and much more. Proven industrial components as well as didactic teaching aids are available as accessories.

System with many advantages:

Low entry price and modular structure
Flexible use for different training professions
Single or double-sided versions
Customised adaptations
Sturdy design made of aluminium system profile
With industrial components and didactic teaching material
Quick, easy and safe assembly of the components

The single-sided version of the MAPS Professional workstation system offers one workstation and is stationary.

The MAPS Professional consists of the following components:

1. Stationary Basic Frame (1x)

The stable frame is made of robust extruded aluminium profile. The profile has two grooves on each side and two separate cable ducts.
Dimensions (WxDxH): 1.600 x 800 x 1.900 mm
Components:
1x fastening set for table top
2x steel top supports
2x Quadro legs 690 mm long
2x Quadro columns of extruded aluminium profile 1.838 mm high with decor profile as cover for cable ducts
2x snap-in decors on the outside
2x snap-in decors on the inside, with brush strip for cable ducts
1x extruded aluminium profile columns 760 mm high, mounted centrally on the tabletop
Colour/decor:
Centre sections: light grey (RAL 7035)
Decorative parts: light grey (RAL 7035) / traffic blue (RAL 5017)

2. Table top (1x)

Dimensions (WxDxS): 1.600 x 800 x 27 mm
Working height: 780 mm
Made of resistant hard laminate, light grey

3. Grooved Plate (1x)

Dimensions (WxDxH): 736 x 815 x 30 mm
Made of aluminium profile plates
Groove spacing: 25 mm
Groove dimension: 8.9 mm
To accommodate components with quick-fix systems
Mounted between the columns, inclinable

4. Horizontal Profile Set (1x)

Dimensions (WxDxH): 1.505 x 30 x 30 mm
Made of aluminium profile
Slot dimension: 8.9 mm
To accommodate electrical boxes and components with quick-fastening systems
Mounted between the columns

5. Experimental Frame (1x)

Dimensions (WxDxH): 730 x 117.5 x 709 mm
Mounted between the columns
2-row
To hold DIN-A4 training boards

6. Cable Holder (1x)

Made of sheet steel RAL 7035, 141 mm length
To accommodate 4 mm safety lab plugs with 6 rows (slotted strip 10 mm)

7. Engergy Terminal (2x)

Dimensions (WxDxH): 1.600 x 325 x 150 mm
Usable width 1.500 mm
To accommodate safety modules and insert plates
Energy terminal completely pre-equipped and wired
Assembly on each side (workstation) from left to right:
- Safety and switching unit
  - 1-phase including circuit breaker 10-16A
  - Undervoltage release
  - Emergency Stop
  - RCD 25A/30mA, 2-pole type B
  - Control lamp
- Mains connection
  - 3 m mains cable, WINSTA socket
  - 5-pole, CEE plug 16A
- Socket module
  - 1-phase, 2 earthed sockets
- Compressed air regulator
  - Adjustable from 0.5-12 bar with pressure gauge and 1/8" quick couplings
- Fixed voltage source
  - 24V / 6A DC, 2 safety laboratory sockets
  - ON/OFF rocker switch
- Distributor plate
  - 2 x 10 safety lab sockets red and blue, connected to DC supply
- Empty plates