SYMplus PALplus Turning
20 Workplaces

Item No.: 10894

Add to wish list

SYMplus PALplus Turning - Programming according to the new PAL coding

SYMplus PALplus Turning is a learning and training program for CNC programming according to DIN and preparation for the PAL examination. This test is based on a new coding, which represents a considerable expansion in quality and quantity compared to the previous PAL command set. For example, a technology cycle can now be linked with position cycles even after PAL. And programming with R as an alternative to I and J and the integration of chamfers/roundings are also possible.

PAL Simulator

In the simulator - with all new commands and cycles that have been relevant for testing since 2009 - all NC blocks can be programmed in a "guided mode". Input dialogues, extensive help pictures and a meaningful simulation with magnifying glass, single block etc., also in 3D, thus enable targeted learning.

PAL multimedia

The extension of the PAL coding means more programming comfort - especially for CNC beginners but also additional learning effort. In order to support this learning, KELLER has developed a multimedia-based introduction in addition to the new PAL simulator. This allows the learner to familiarise himself interactively step by step with the cycle parameters. The subject of cutting data is also taught in a practical way.

You need plusCare for every technology.

When ordering, please provide an e-mail address for sending the download link.

SYMPlus PALplus Turning is provided as a download. The license is protected by a USB dongle. As an alternative option, the program can also be started with access data via a permanent Internet connection (CmWAN). All available standard postprocessors for generating NC programs for your control are included, including the 3D Simulation expansion module.

When ordering, please provide an e-mail address for sending the download link.

Commercial PC, e.g. with Intel ® Core™ 2 Duo E8400 @ 3GHz
Recommended operating systems: Microsoft Windows® 7 / 8 / 8.1 / 10
Main memory: min. 2 GB
Hard disk space: approx. 2 GB free per technology
Screen resolution: min. 1024 x 768 px
OpenGL-compatible 3D graphics card, like the GeForce GT 210 (1024 MB)
PC keyboard and mouse
Sound card and speakers
Internet connection for one-time license activation (not permanent, exception CmWAN see below)
Data transfer to the controllers via network connection, serial interface (with handshake RTS/CTS), USB interface
There are two alternative licensing options available, which are determined in advance:
- Cm or CodeMeter - with CmStick (dongle) at USB2 port or CmWAN or
- CodeMeterWAN - with permanent Internet connection

Rotary postprocessors are available for the following controllers or are included as standard from SYMplus with plusCARE™:

BOEHRINGER B1T, B2T, B32T, B3T
BOSCH ALPHA 2, BOSCH CC 100T, BOSCH CC200T
DIN/PAL 1994
EMCOtronic T1
ENGELHARDT 3300
FAGOR 800T, 8055 T
FANUC 0i-TB, 0T, 3T, 15TF, 18i, 21i, QT2
GILDEMEISTER EP, EPL1, EPL2
HEIDENHAIN DINPLUS
GSK 988T
HAAS SL, TL
HNC-21T
LUXTRONIC LUX-TURN
MAHO Graziano CNC 432T
MAZATROL T32 (ISO)
NUMBER 1060T, 760T
NUMERICS CNC 600
OKUMA OSP 500 L_G
PAL 2009
RODE DELESEN
WABECO
SINUMERIK 3T, 802C, 802D, 808D, 810D/840D, 810T/820T, 840C, SINUMERIK 840D sl / 828D, C200, ShopTurn ISO
GRAPE TX8, TX8D/E/F