The combinable model consists of the conveyor belt and pneumatic separators modules. The containers are guided past the row of separating stops by the conveyor belt. The three separating stops eject a workpiece onto the conveyor belt into the containers when the corresponding input signal is received. The loading can be determined with the information, the coded containers and/or programmatically. The loaded containers are transported further on the conveyor belt.
The product series "combinable models" is a modular model system. With this, several members of work groups can be given different combination models to work on and these can then be networked with each other in a group work to form an overall project in terms of hardware and software.
With Christiani's industrial models, you can convey almost all learning content as in a real automation system:
- Requirements definition
- Control planning
- Control selection
- Programming
- Commissioning
- Setup and adjustment
- Verification of results
Training in the departments:
- Automation technology
- PLC programming
- Control technology
- Electrical engineering
- Maintenance
- Logistics
Dimensions: 405 x 550 x 260 mm (L x W x H)
Supply voltage: 24 V
Components:
-
Sensors:
- 2 x Reed contact
- 3 x Light Scanners
- 4 x inductive proximity switches
- 2 x Mechanical switches
- 1 x pressure switch
-
1 x Motor with one direction of rotation (compressor)
-
1 x Motor with two directions of rotation
-
6 x Valves
-
1 x LED
Requirements for the PLC:
- 11 x Digital Inputs
- 9 x Digital Outputs
Electrical connection:
- SUB-D1 - 37 poles (24 pins occupied)
Accessory Cable:
- 1 x connecting Cable 20 x 0.34 mm²
- 1 x connecting Cable 8 x 0.34 mm²