Note: The underlay cannot be used without suitable hardware. You can find the appropriate hardware under "Additional hardware required"
The documents for the ‘Fundamentals of Electrical Engineering and Electronics’ teaching system consist of
- Direct current technology
- Alternating current technology
- Semiconductor components
- Basic circuits of electronics This enables you to teach students the basics of electrical engineering, electronics and analogue technology
The DC technology experiment guide covers the following topics:
- Electrical circuit
- Ohm's law
- Voltage and current fault circuit
- Electrical resistors
- Equivalent voltage source
- Series connection of voltage sources
- Parallel connection of voltage sources
- Electrical power and work
- Efficiency of electrical power
- Voltage, current and power adjustment
The AC technology experiment guide covers the following topics:
- Determination and visualisation of parameters in alternating current technology
- Three-phase alternating current (three-phase current)
- Capacitor in an alternating current circuit
- Coil in an alternating current circuit
- Interconnection of resistor, capacitor and coil
- Transformer, transformer
The experiment instructions for semiconductor components cover the following topics:
- Rectifier diodes
- Z-diodes
- Diodes with special properties
- Bipolar transistors
- Unipolar transistors (junction field effect transistors)
- MOS-FET (IG-FET)
- Unijunction transistor (UJT)
- Thyristors
The experiment instructions ‘Basic circuits in electrical engineering’ cover the following topics:
- Amplifier circuits
- Toggle circuits
- Modulators and demodulators
- Power supply circuits
- Power electronics circuits
- Binary switching elements
- Operational amplifiers
All experiment instructions are supplied with solutions.
Under "Scope of delivery/individual parts" you will find the individual experiment instructions with detailed information on the respective learning objectives.
Experiment instructions incl. CD-ROM and solutions