Student power supply AC/DC (stabilised)
0-15 V DC stepless - 6 / 12 V AC

RiSU compliant
Item No.: 104017

The student power supply unit AC / DC (stabilised) 0-15 V DC stepless - 6 / 12 V AC is a handy and easy-to-use power supply unit for use in class. It can be used to generate a stabilised DC voltage in the range between 0 and 15 V. It supplies a stabilised DC voltage at all DC output levels. It supplies a continuous current of 6 A at all DC output voltages, which may also rise to 8 A for short periods (less than 1 hour). Above 8 A, the output voltage is regulated down (current limitation).

In addition, the power supply unit has an AC output of 6 V and 12 V with a maximum of 1.5 A. This output can be used simultaneously with the DC output. This output can be used simultaneously with the DC output.

The output voltage is shown digitally on an illuminated display. The power supply unit is easy to transport thanks to the practical handle.

A switching power supply with a safety transformer is used in the student power supply unit to generate the DC voltage. This ensures galvanic isolation. The design prevents pupils from coming into contact with live components through the ventilation openings - even with pointed objects. The sockets are designed as safety sockets. Experiment cables with 4 mm safety plugs as well as those with 4 mm banana plugs can be used.

The maximum output voltage can be limited with a 3 mm Allen key (included in delivery). This prevents damage to the experimental setup due to an impermissibly high output voltage.

  • 1x power supply unit
  • 1x mains cable (type F) with IEC connector, length 1.8 m
  • 1x 3 mm Allen key (for voltage limitation)
  • 1x instruction manual
  • Input voltage: 230/240 V AC 50 Hz

  • Output voltages: DC voltage: 0-15 V, stabilised and smoothed

  • Max. Voltage deviation (at full load) 5%.

  • Max. Residual ripple (at full load): 300 mV

  • AC voltage: 6 V and 12 V unregulated

  • Output current: DC voltage: 8 A max, 6 A continuous current

  • AC voltage: 1.5 A max.

  • Voltage limitation: via Allen key on front panel

  • Overcurrent protection: DC voltage: electronic, automatic

  • AC voltage: thermal, automatic

  • Display: DC voltage: illuminated, with 2 decimal places

  • Dimensions: 125x230x178 mm (WxHxD)

  • Weight: 2200 g (without mains cable)


Variants