Plug-in Elements Electrics - Case
with Plug-in Elements Electrics and Accessory Material Kit

Experiments on the subject of electricity:

• Electrical resistance
• Thermal effect of electric current
• Work and power
• Chemical effect of electric current

Experiment on the subject of electronics:

• Semiconductors
• Solar cells
• Diodes
• Transistor
• Capacitor
• Logic circuits

The additionally available magnetic base plate also makes it possible to use the box system and the plug-in elements as demonstration experiments on a magnetic board. By using the same system for the demonstration on the blackboard and the student experiments, the students can more easily understand the interrelationships.

Transistor box:

For carrying out all electronics experiments with the NPN - transistor as well as the electrical experiments with the 470 Ω potentiometer.

• 21 built-in touch-proof sockets.
• Connected with clearly visible current paths by high-contrast white screen printing

Plug-in element system

Clearly arranged with correct circuit paths and symbols

Our unique plug-in element system with the corresponding boxes provides an extremely clear opportunity to carry out experiments in the field of electrics or electronics. Both the individual plug-in elements and the individual boxes are printed with clearly visible switching paths and symbols. In this way, the students learn the correct circuit diagrams directly and intuitively and can reproduce them correctly at any time. The given position for the plug-in elements makes it easy for the students to realise the corresponding circuits. They can concentrate fully on the physical basics when assembling.

Countless combinations with our boxes

With the help of the different boxes and the numerous plug-in elements, a wide variety of experiments can be realised: From basic simple circuits to complex electronic circuits The student workbooks (available separately) contain comprehensive and didactically sequenced instructions for the individual experiments.

Magnetic as a demonstration experiment

The additionally available magnetic base plate also makes it possible to use the box system and the plug-in elements as demonstration experiments on a magnetic board. By using the same system for demonstrations on the blackboard and the student experiments, the students can understand the connections much more easily.

Clearly and safely sorted in plastic case with matching foam insert.

• 1 x transistor box
• 2 x plug element lamp socket E10
• 2 x plug-in element switch ON/OFF
• 2 x plug-in element battery holder (baby)
• 2 x plug-in element resistor 100 Ω
• 1 x plug-in element resistor 500 Ω
• 1 x plug-in element resistor 1 kΩ
• 1 x plug-in element resistor 10 kΩ
• 1 x plug-in element variable resistor 10 kΩ
• 2 x plug-in element connector plug with socket
• 2 x plug-in element connecting plug
• 2 x terminal plugs, set
• 1 x electrolyte trough with separating sieve
• 2 x holder with hole
• 2 x holders with slot
• 1 x conductor and non-conductor, set
• 1 x bimetal strip
• 1 x set of electrodes
• 2 x crocodile clips with plug pin
• 1 x crocodile clip blank
• 1 x plug-in element PTC resistor
• 1 x plug-in element NTC resistor
• 1 x plug-in element LDR resistor
• 2 x plug-in element LED red
• 1 x plug-in element Si diode
• 1 x plug-in element Z-diode
• 1 x plug-in element capacitor 100 μF
• 1 x plug-in element capacitor 1000 μF
• 1 x plug-in element transistor NPN, left base
• 1 x plug-in element buzzer
• 1 x plug-in element resistor 47 Ω
• 1 x plug-in element potentiometer 470 Ω
• 1 x fuse wire, D = 0.1 mm, roll, red
• 1 x resistor wire, D = 0.2 mm, roll, blue
• 1 x copper wire, D = 0.2 mm, roll, black
• 2 x incandescent lamps E10, 1.5 V/50 mA
• 2 x incandescent lamps E10, 6 V/50 mA
• 1 x incandescent lamp E10, 6 V/0.5 A
• 1 x bulb E10, 6 V/2,5 A
• 4 x connecting cables red/black, 4 mm-plug
• 4 x connecting leads red/black, safety plug

Case Dimensions: 53 x 40 x 12.5 cm

Transistor Box Dimensions: 232 x 142 x 45 mm